Forza Italian Flag Badge

This beautiful Italian flag badge is a great addition for any Italian car. It is designed to fit along with the car's name on the rear of the vehicle. The badge measures 200 mm x 10 mm. Ideal accompaniment to add to the vehicle's name badge on the rear of the vehicle.

The badge is fire-glazed enamel. The metal bar is nickel-plated and polished to provide a smooth and mirror-like finish. The enamel flag colors are hand applied to the metal recesses and baked in an oven to provide a hard and durable finish.

Very easy to install. Clean the area where you want to install the badge free of oil and dirt. A strip of 1mm thick 3M VHB acrylic adhesive mounting tape has been applied to the underside of the badge. Peel the backing off the mounting strip and apply the badge wherever you like.

• Clean area free of dirt, oil and wax. Suggest a light spray of Windex and a soft cloth.

• Lightly mark the spot to install the badge. A water soluble felt tip pen might work nicely.

• Peel the backing off the mounting tape.

• Apply the badge and press firmly in place. Once bonded, the VHB adhesive is very strong.

• If the surface to be mounted to is not flat, you can compensate slightly by removing the mounting tape from the center portion of the badge, leaving the ends. You can also obtain thicker VHB adhesive mounting tape from any automotive store and apply to the ends of the bar leaving the center portion free.

• Avoid bending the badge as you may induce cracks in the colored enamel.

• If you ever wish to remove the badge, heat the area gently with a hair dryer. Then using a piece of dental floss, slide the floss under one edge and use a gentle sawing action to remove the adhesive strip. Clean the residue with a gentle solvent such as car wax.