Model B4 Controller
Two-way and three-way models


For vehicles with two vacuum control valves.

The Model B4 Controller is available as either a two-way exhaust controller or a three-way exhaust controller suitable for installation in harsh environments such as the engine bay of a high-performance sports car.  Normally aspirated vehicles can use the three-way controller whereas turbo-charged cars should not as it may be detrimental to the turbo-charger.

Depending on application, the controller offers up to three modes of operation:

  1. Normal Mode:  The vehicle controls operation of the exhaust bypass valves.  This is the stock mode.
  2. Always Open Mode:  Forces the valves to remain open at all times, overriding the vehicle's ECU.
  3. Always Closed Mode:  Forces the valves to remain closed at all times.  This mode should not be used with turbo-charged cars. 



Plug-and-Play  ... 100% Reversible

The kit is completely plug-and-play.  Power for the controller comes from the existing connector to the car's exhaust bypass vacuum solenoids, and no wiring modification are required because the kit includes connector cables for the vacuum solenoids.  Since no modification are required to install, if you ever want to remove the controller the installation is 100% reversible.

Start-up option user configurable for Always Open or Normal Mode (ECU Control).

Simplified installation is straight forward.  The small size makes it easy to find a suitable location to install the controller.  Unplug the existing connectors to the vacuum solenoid valves, connect the included Y-cables and route the cables to the controller.  Once installation is complete, you use one button on your remote transmitter to open the exhaust bypass valves and the other button to close the valves and return control to the car  ...  and, you also have the ability to configure a manual on/off switch that you can mount inside your vehicle.

Click for Technical Specifications

Vehicle Compatibility

Other Vehicles

The Model B4 Controller has two connectors and is designed for cars with two vacuum control valves. The Model B4 can be used in place of the Model B4A. But one of the connectors will remain unused. Contact us for compatibility with other vehicles not listed above.

Kit Contents


Installation Instructions

Design by Forza Componenti