Model B4-FP Controller
$535.00
The Model B4-FP controller is a 2-way exhaust controller that is designed for installation in extreme environments as one would encounter in the engine bay of high performance sports cars.
The B4-FP is specifically designed for use in motor cars such as the Ferrari 488 Pista, F8 Tributo
and the Lamborghini Aventador SVJ and other motor cars
with very sensitive vacuum control technologies. The installation kit includes two additional vacuum control valves so that the electrical
circuit for the controller is completely segregated from the circuit controlling the existing vacuum control valves. This design allows control
of the exhaust bypass valves without any error conditions or trouble codes. And you can choose the Normal or Always Open mode at vehicle start.
The controller provides two modes of operation:
- Normal Mode: The vehicle controls operation of the exhaust bypass valves. This is the stock mode.
- Always Open Mode: Forces the valves to remain open at all times, overriding the vehicle's ECU.
Description
Plug-and-Play ... 100% Reversible
The kit is
completely plug-and-play. Power for the controller comes from the
vehicle's fuse box. A fuse tap is included to obtain power so no
wiring modifications are required. Since no modification are required to
install, if you ever want to remove the controller the installation is
100% reversible.
Start-up option user configurable for Always Open or Normal Mode (ECU Control).
Simplified installation is straight forward. The small size makes it easy to find a suitable location to install the controller.
- Locate and install the included two new vacuum control valves.
- Attach the included new vacuum hoses.
- Connect the two control cables to the new vacuum control valves and the controller module.
- Connect to the power source.
Once installation is complete, you use one button on your remote transmitter to open the exhaust bypass valves and the other button to close the valves and return control to the car ... and, you also have the ability to configure a manual on/off switch that you can mount inside your vehicle.
Click for Technical Specifications
Vehicle Compatibility
Ferrari
- 488 Pista
- F8 Tributo
F8 Tributo
Disclaimer
The controller product may interfere with the management
of the vehicle's Gas Particulate Filter (GPF) and under some circumstances with
the F8 Tributo may give you a check engine light. To avoid these error
conditions, an OBD CEL delete device, such as the Novitec Tectronic CEL Delete
Device, is recommended.
Lamborghini
- Aventador SVJ
Other Vehicles
Contact us for compatibility with other vehicles not listed above.
Kit Contents
- Controller module with two remotes. Extra remotes available.
- Two Pierburg vacuum control valves (same as original equipment on vehicle)
- Two 120 cm connection cables.
- One 120 cm extension cable.
- Two stainless steel cable ties to secure the new vacuum solenoid valves.
- Silicone vacuum tubing (60 cm) and two barbed coupling fittings.
- Fuse tap and wiring.
- Two strips 3M Dual Lock Reclosable Fasteners.
- Full installation instructions.