BRE Exhaust System
Audi R8 GEN 1 V10
5.2L V10 Coupe and Spyder
2009 - 2015
Valved Inconel

Manufactured from Inconel 625.  The same material used for F1 systems & hypercar P1, 918, La Ferrari

The exhaust gases leave the V10 stock headers into the BRE X pipe, which balances exhaust gasses and dramatically enhances the tone of the V10 engine. With the valves closed, exhaust gasses are then directed into the small top mounted silencers for reduced volume when driving in low load conditions. When the valves are open the exhaust gasses bypass the silencers and a straight through exhaust system is achieved.  ​

The vacuum valves are controlled using the stock Audi system (In car button & driving mode) or using the Forza Exhaust Controller.  

Simple bolt on bolt off solution using standard brackets & hangers. With the BRE setup, no ECU tune required and no CEL warning light.  

Orders will take 7-10 days for delivery.

Key Features

Require Fitting?

We can assist you to arrange fitting. Contact us today, we will work with you to find a fitment center and time to suit you.

Design by Forza Componenti